Homebuilt CNC test
- Length: 9:24
- Rating Average: 1.00 from 1 people
- View Count: 68
- Author: SwissMadeMax
Tags: CNC machine milling solsylva
First test of a Solsylva homebuilt CNC milling machine with a pen instead of milling tool to test movements.
solsylva belt cnc
- Length: 2:17
- Rating Average: n/a
- View Count: 44
- Author: daburdge
Tags: belt cnc diy drive electronics mechanics solsylva
diy cnc
cnc router
- Length: 3:47
- Rating Average: 5.00 from 1 people
- View Count: 2446' favoriteCount='5
- Author: greggzurek
Tags: cnc cnczone skipper_52 solsylva
homebuilt solsylva
Homemade cnc router
- Length: 2:9
- Rating Average: n/a
- View Count: 214
- Author: mcmattgee
Tags: belt carving cnc drive mach3 model router solsylva wood
cnc router cutting red oak plans from solsylva.com
Homemade CNC Router
- Length: 2:16
- Rating Average: 5.00 from 4 people
- View Count: 3286' favoriteCount='4
- Author: stabio1
Tags: cnc homemade k2 mill router solsylva sosylva
This is a video of my homemade belt-driven cnc router table doing its first steps. It was built from the solsylva plans. www.solsylva.com
Homebuilt CNC
- Length: 4:4
- Rating Average: 5.00 from 3 people
- View Count: 6118' favoriteCount='5
- Author: mjcmendonca
My first real cut with my homebuilt belt-driven CNC (Solsylva model).
A Real Project - Counter Stand
- Length: 3:36
- Rating Average: n/a
- View Count: 1209
- Author: cncron39
Here's the first piece of furniture off the cnc - an enclosed counter stand so my daughter can be at the counter with Mom.
Some Actual Cuts
- Length: 2:54
- Rating Average: n/a
- View Count: 545
- Author: cncron39
I'm working on a design for a dust shroud - this shows the parts being cut at a slow 60 ipm.
Measurment Tests
- Length: 2:36
- Rating Average: n/a
- View Count: 892
- Author: cncron39
I used a dial indicator to measure the movement and backlash in X and Y.
Moving in 3 Axes
- Length: 1:57
- Rating Average: n/a
- View Count: 659
- Author: cncron39
I wired up all the electronics - they're now safely tucked away. The router is mounted and all three axes are moving. Final testing before cutting.
Page: 1 of 2
